Storm Solenoid Harness

Shipping calculated at checkout.

Upgraded lower portion of plow side wiring harness where the harness connects to the coil valve body on the plow. This is by far the most common spot for harness failure on Metal Pless plows. 

The built-in Deutsch connectors allow you to quickly connect and swap out these lower sections of the harness from our Metal Pless 4,8, or 14 pin harness. 

These lower sections do not connect to a factory harness as they do not have the built-in Deutch connectors.  

To make a complete harness, you would need 2 of these sections along with a Storm harness. We sell these portions in quantities of one because often times when a harness fails only one side fails, not both.